| Brand | Powerbuilt |
| Material | Alloy Steel |
| Vehicle Service Type | Car |
| Specification Met | OEM |
| Global Trade Identification Number | 00028907101675 |
| Manufacturer | Alltrade Tools LLC |
| UPC | 028907101675 |
| Model | 648401 |
| Manufacturer Part Number | 648401 |
| Brand Name | Powerbuilt |
| Compatible with Vehicle Type | Car |
| Material Type | Alloy Steel |










Rob M –
Worked awesome
Rob M –
Charles –
Used the tool to open up a bronze 7/8 id bushing .004. Use lots of oil and clean the stones frequently. The surface finish was a little rough in the bronze material but could be easliy polished.
Charles –
John Jordan –
Use this to enlarge the thumb hole in my bowling ball. Worked great!Remember that this item screws together clockwise. If you run the drill counterclockwise the hone will quickly come unscrewed. This is not a fault of the product, it’s just a fact.
John Jordan –
Mark Gaarz –
I damaged the receiving hole for new u-joints in my axle an needed a fix. This item trued up the hole removing the rolled over damaged metal, worked perfectly. Be careful, removes material quickly, I counted 15 seconds per hole to true up the bore on my axle shaft. If you use it to true up a hole I’d suggest 15 seconds run time then check bore. If still not true, run another 15 seconds, on an on, till bore is dressed.
Mark Gaarz –
George P. –
The product was well made & reasonably priced, would recommend.
George P. –
gbnpp05 –
I bought this specifically to hone out some 3/4 inch bushings. No way will this hone them since it will not collapse enough to go in the bushing bore.Also, the shoes are riveted on. Good luck changing them with the Amazon recommended replacement stones.
gbnpp05 –
B. Ng –
I used this to hone out a shock mount. It worked great there, so I don’t see why it wouldn’t work for what its intended to do. Just note, they have different sizes, so get the right one. They also have different grit stones available (not as a part of this package).
B. Ng –