‎LUXE Bidet NEO 185 – Self-Cleaning, Dual Nozzle, Non-Electric Bidet Attachment for Toilet Seat, Adjustable Water Pressure, Rear and Feminine Wash (White)

I bought this Bidet and was amazed how well it works. It was easy to install and we haven’t had any problems with it. It’s reasonably priced and good quality.

After being in the ER this week, the nurse advised that I purchase a Bidet online from Amazon to address my GI issue(s). I did a thorough search to find one that was within my budget and easy to install with all the necessary instructions. As such, I purchased the LUXE Neo 185 and am very pleased the with color, quality and instructions provided. However, that being said, I did have some issues with installation due to my toilet configuration and the very small space in which I had to work. I believe it took a couple of hours total to install when it actually should have only taken about 45 minutes to an hour. I must say that although it took a while to install, the use of this Bidet is fantastic! It’s easy to use and so, so comfortable on the lower extremities. Overall, I’m very satisfied with the product and wish I had purchased it long ago to enjoy its comfort and many benefits.

Works really well, easy to install, and is fairly unobtrusive. The new control knob is a nice upgrade over the older style lever (which could be easily activated inadvertently). These things will spoil you in a hurry, leave your rear end nice and clean, and you won’t want to use a restroom without one!

I love my bidet! I first bought one because I weighed over 200 pounds and I had a difficult time wiping after I used the toilet. Now, I have lost over 50 pounds (please hold your applause); I still use it and love it! This is the second one I bought because I hit the other one with the toilet plunger and knocked it out. Be careful if you have to “plunge” the toilet because the bidet spray part hangs down and gets in the way. It is also difficult to clean the toilet behind it too. But that is the only negatives, the positives more than make up for the negatives. Toilet paper is expensive (like everything else). Your bill and need for toilet paper will dramatically decrease. You simply will not use that much. The water spray from the bidet cleans you off much better instead. The knob on the side of the toilet where the bidet is attached, can be turned to adjust how much spray you want to come out. At first, I just sprayed at the low setting, but as I got use to it, now I switch between high and low depending on how much I think I need to clean myself. Okay, I know you are squeamish about cold water on your butt. It really isn’t that bad. In fact, it gives me a refreshing and clean feeling. When I wipe, there is no nasty stuff on the paper, if there is then I run the bidet again to make sure I am really clean. I know your second complaint is what about the wet when I pull my pants back on. I sit there a few seconds (drip dry!) and then use the toilet paper to wipe/dry off. You still need to use toilet paper to dry off, but not as much as before. I really don’t have a problem with wet pants.The bidet has a setting for the spray to adjust itself to clean your vag. I wish everybody had one and used it so we wouldn’t have so many smelly people! I don’t understand why more Americans don’t use bidets since we are so obsessed with germs and cleanliness. Anyway, the bottom line (pardon the pun) is I give this bidet five stars because it does the job well and I would definitely not be without it. Oh, one more thing. It is easy to install. Just don’t forget to turn off the water (personal experience here) before you attach the hoses.

The product installed very easily–I installed it myself in ~15 minutes, and I’m not a professional.Instructions were easy to follow, seated to my toilet and aimed properly on the first try. Product works great. Hoses and connections seemed strong and quality–not concerned about leaks and haven’t had any!Only complaint would be that the water can be a bit cold, but without a heated unit, that’s expected.

Ok so I couldn’t use it in the toilet next to our bedroom. I was discouraged because: 1. The toilet seat bolts in the toilet were not long enough to accommodate the extra space for the bidet and the toilet seat and 2. The space between the toilet tank and the fill valve was too small to accommodate the T-adapter, it just wouldn’t fit even with a flexible hose. It is a very low toilet. I was ready to put everything back in the box and return it when I realized that I had another toilet. With that one I had no issues. Everything went smooth and I had it working in fifteen minutes. In my first toilet I made a water mess and had to use a towel to mop the floor but in the second toilet there was no water mess. The bolts were long enough and there was plenty of space for the T-adapter. All the connections attached smoothly without the included Plummer’s tape and with no leaks. It seems to work fine. I must say the water jet is a bit strong even at its lowest setting but maybe I can adjust it with the water supply valve at the intake.Oh , I almost forgot, after installation, the toilet seat does not rest flat on the bowl. There is a very wide gap in the front (1 1/8”) because my lid has a lip around the edge that does not allow it to close flat.They suggest installing toilet seat bumpers. But it is so wide that I might have to buy a new toilet seat. This means an extra expense and a few days more before all is finished but in the end it may be worth it. I do recommend this product. It is a simple design, easy to install and works just fine.

I chose this product because I was looking for a product that was easy to install and didn’t require an electrical connection. This bidet was a great value for the price and installation was quick. It installs between the porcelain toilet bowl and the toilet seat, so all I had to do was unscrew my existing toilet seat, place the bidet on the toilet (and align the mounting holes), and re-install the toilet seat. The product includes a water hose T-connector that splits the inlet water from the wall and directs it to the tank AND the bidet. All the connections were industry standards, so all the hoses connected to each other without issue (this is a great opportunity to upgrade your line hose to a steel braided hose if you don’t already have one). No electrical connection was required as this model does not have a water heating feature. The water temperature is ambient and not uncomfortable.After installation I noticed the aim of the sprayer was not aligned properly and I called the manufacturer for customer support. My call was quickly answered and after a few simple questions, the support agent determined I needed a replacement. A new replacement bidet was sent to me immediately at no charge. I was very pleased by their customer service and I recommend this product.

We bought the Luxe Bidet, our toilet lid would not close even with bumpers, so I ordered the Luxe lid that goes with it. The lid fits great but was somewhat of a pain and my husband is a plumber. He recommends if you are not one and have never installed a bidet with this lid that works perfectly with it, hire or get someone who knows how. Now for the bidet, it’s really nice. Be sure to test it out before putting on the lid but have a towel in front of it because it will spray the room. 🙂 Once the lid is on, you’re fine. I do recommend getting the Luxe lid because it fits it perfectly, and most people don’t have a cut out in the back of their regular lid for the part that shoots out the water to fit in. It cost more yes, but so worth it. Wish I had ordered it with the bidet in the first place. This bidet was recommended by several on Reddit, so I thought I’d give it try. Glad I did.

I never posted a review when I bought this. I honestly had no idea how I’d like it.Especially when it really wasn’t that expensive against other products.People warned me that I wouldn’t like cold water spraying me in the winter and that cheap ones don’t work well.I really never believe 5 start ratings. Especially when people say they just purchased the item.Here’s the real truth. The physical installation was simple. I wasn’t crazy about my old toilet seat so also ordered the matching toilet seat. I like the soft closing feature on the new toilet seat.The bidet does a great job and the water pressure is fully adjustable.I use to use a lot of toilet paper and now I don’t.I’ve tried to get my wife to use the female position. I’m not sure if she actually ever tried it but said she doesn’t want to use it, nor does she like the plastic toilet seat. I bought one for her toilet as well and she doesn’t want it. I never installed or returned it.For the install you have to close the water valve under the toilet. Well, mine wouldn’t completely shut off. The old valve would still let some water through. I decided it was time to also change the valve. It was soldered on the pipe so I had to go buy a pipe cutter. To do this I had to turn off the water main for the house. That was also not turning off 100% and I decided I wasn’t going to break that fitting to replace the main valve. I was going to turn my water off at the street so I began to go on a wild goose chase to find the right pole to turn off that special valve. I was told I needed a special pole that isn’t sold at box stores. I ran around to multiple plumbing supply houses until I found one. It wasn’t cheap. I later (after all this was done) saw it at Home Depot for 1/3 what I paid.So now I have purchased all these tools and a new shut off valve for my toilet. I shut off all the water to the house from the street and cut off the valve. I don’t have enough pipe left sticking out the wall to put the new valve on. I know how to properly do it because years ago I had borrowed a neighbors pipe cutter, was able to turn off the house water, and easily replace her toilet valve.Now I need to keep the house water off and find a plumber. I don’t know how to solder a fitting on a pipe. I had to hire a plumber who can come ASAP and pay for a different valve that is the kind you solder on. In the end I had spent several $100.I still recommend this Bidet. If your toilet valve turns off the water the installation was very easy to do in about 30 minutes. I also like it’s matching toilet seat. Depending in the location of your toilet seats feet you may not be able to close the seat over the bidet. I wasn’t crazy over my seat so just went ahead and ordered theirs. Like I said earlier, I like the plastic as it’s easier to keep clean then the old wood one. I really like the soft self close. I’ve accidentally let other toilet seats slam because I’m now use to mine.

product is amazing! What a game changer. This product is great for anyone but especially great for people with mobility issues that cannot reach “back there”. My husband thought i was crazy but he loved it the first time he tried it! It is not heated water but it does not need to be. Some people say the stream is strong, but there is a dial that lets you turn down the strength of the spray. Super easy to install with all the needed items to install it. I did not have any problems with leaking. No leaks the first try! My toilet seat is elongated from Walmart and it fits perfectly without the use of any extra bumpers. It makes us so much cleaner than toilet paper. A little TP to dry is all you need. We will be saving a lot of money in toilet paper and save the environment while we’re at it! Try it, you will love it!

Follow-up Review:First of all, I encountered a small problem with the functioning of the seat (fixed easily), but I want to remark that, when I called the company at the number listed in the bidet manual, my call was answer within a few minutes. The agent was extremely helpful, and made some suggestions which helped me solve the problem. The agent also suggested getting some “bumpers” (available for about $9) at attach to the toilet seat in order to change the amount of pressure on the bidet apparatus when someone sits on the toilet seat. His suggestions were very helpful in resolving the issue in the short term, and I am convinced that the bumpers will solve the problem permanently.As to the problem solved:After more than a year of use, the product is working great, except that I did run into a little problem. The bidet is designed to fit some different configurations of toilet seats and toilets – installation is adjustable, to a certain extent. As a result, over time the toilet seat can move in relationship to the positioning of the bidet. If the toilet seat gets too far forward of the bidet, it can act to reduce the water pressure going to the bidet heads, precluding them from descending below the front cover of the bidet, and effectively no longer functioning. That happened today. I was able to “repair” the problem by loosening the nut that attaches the toilet seat to the toilet bowl, pushing the seat back towards the toilet tank, and then retightening the nuts. The Bidet now works as it should.Part of this problem was cause by the fact that our toilet set is a form-fitted plastic, rather than a less expensive wood seat. The plastic tends to bend a bit, as it is much less thick than the wood. (We have the same bidet on another toilet with a wood seat, and we have not encountered this problem before.)In order to deal with this difference in the toilet seat construction, the agent suggested the installation of some bumpers obtainable from the manufacturer for about $9. I have ordered the bumpers, and they should arrive in 2 – 5 business days. In the meantime, I’m certain I can keep the bidet working properly, even if I have to readjust the seat again. That is an easy process, as it requires only slight loosening of the nuts on the bolts attaching the seat to the toilet, moving the seat back towards the tank, and then retightening them. (Sorry if I’m repeating myself, but I don’t want to spend any more time editing this review.)So, 5 stars for the bidet and 5 stars for customer support.Original Review:After installing the bidet in a secondary bathroom and using it for the first time, I immediately ordered another one for the master bathroom. I anticipate that a month’s supply of toilet paper will turn into a year’s supply – probably even longer. Retractable spray-nozzles aimed at just the right place, front or rear selectable nozzles, with a self-cleaning option on the spray-select dial.Installation was relatively easy – but then, I’ve replaced the mechanisms in toilet bowls several times, so working with that kind of equipment is not unknown territory for me. A couple suggestions:See if the water line from the water supply faucet to the toilet tank is flexible. If it’s not, you will need to replace it with a flexible line. (Note: I had to replace my water line, a stiff metal pipe of about 8 inches length. I replaced it with a 20 inch flexible pipe, because shorter flexible pipes weren’t quite flexible enough – a 12 inch pipe could not be made to bend to fit the space without putting a lot of pressure of the supply line coming out of the wall, and I didn’t want to cause a leak inside my wall. The 16 inch was almost flexible enough, but not quite. With the 20 inch, I could loop the pipe around and up, and gain a lot of adjustment room.)Make sure you have a large screwdriver or some other tool which will enable you to loosen the bolts holding the toilet seat to the toilet, as you will need to remove the seat and the bolts in order to install the bidet attachment.Next, make sure you have the wrench(es) and a set of pliers that fit any nuts on the water supply to the toilet, as you will need to at least remove the supply line connector at the toilet tank. The bidet attachment kit comes with two plastic wrenches. Neither one fit any of the nuts on my toilet.This connector is usually held in place by a plastic nut with flanges so it can be tightened by hand. Loosening it by hand may be a lot more of a problem, hence the need for some tool (like big pliers) which can break the seal on the connector nut and get it started. Once that seal is broken, you should be able to screw the nut back on with your hands, giving it one last 1/4 turn with you pliers.Use the white Teflon tape that comes with the bidet to help seal the water connections. Just one turn around the threads of the connections is enough. Teflon tape is worse than plastic wrap for getting bound up in itself. I keep some on hand for various projects. It’s easy to get an any hardware store. Look up a video on it on YouTube if your not sure how to do it. It’s not hard to do, but if you’re like me, you end up wasting a lot, because it gets bound to itself in a tight little rope that’s hard to un-bind.As an add-on, Luxe sells a T-Valve connect which has a shut-off for the Bidet water supply. The T-valve that comes with the kit works find, it just doesn’t have a shut-off. It’s possible that such shut-offs can be purchased at hardware stores or Lowes or Home Depot, but I don’t know. It’s just one more convenience – if for some reason the bidet attachment start leaking, you have to shut off the water supply to the toilet as well. The T-Valve shut-off should enable the water supply to the toilet to continue unimpeded.When installing, have a small bucket or a towel handy, as there will be a small amount of water that escapes when removing the water supply to the toilet. In that regard, remember to always turn off the water to the toilet at the supply faucet and then to flush the toilet before doing any work on it.